Krell Industries 222 manual IR Out Control

(SECTION SEVEN: Customizing the Evolution 222 continued)

(Input Trigger continued)

OFF

The Evolution 222 does not respond to 12 V input trigger commands.

NORMAL

The Evolution 222 responds to 12 V input trigger commands.

THEATER

The Evolution 222 responds to 12 V input trigger commands, and the theater mode enabled input is selected automatically. See Theater Mode, on page 41.

IR Out Control

5Menu Button or Key Enter or exit the menu.

14 Volume Knob or Level Keys

This function enables you to access Evolution 222 IR commands and program a learning remote control.

Enter the menu, then:

1.Use the level control knob on the preamplifier front panel or up and down keys (14) on the remote control to select: IR OUT.

2.Press the enter button on the preamplifier front panel or the enter key (6) on

the remote control. The front panel display (3) shows the default mode: B-1

MAIN.

3.Use the level control knob or the up and down keys to select the desired IR command from the list.

4.Press the enter button or key to send the command out via the preamplifier front panel IR transmitter (2). The stand-by LED (7) on the preamplifier flashes, indicating that the command has been sent.

5.Repeat Steps 2-4 for each of the commands you wish to transmit.

6.Press the enter button or key to confirm the selection. The front panel display reads: IR OUT.

For a listing of IR codes, see the Evolution 222 developer’s reference entitled

RS-232 Port: Sending Commands and Interpreting Data.

Navigate the menu hierarchy; review functions and configu- ration options.

6Enter Button or Key

Select a configuration option; confirm a selection.

BACK

Scroll backwards through the menu hierarchy; exit a menu option without confirming it.

36