Krell Industries MD10 manual Maintenance, Remote Controlbattery Installation and Removal

I.MAINTENANCE

.B.e.cause of its superbbuild quality the MD-10requires little maintenance.Shouldtlie unit becomeexcesslvly dirty, clean the lens assemblywith a cameralens brush madeof a soft material like camelhair. Theacrylic top

p!ate and dust cover shouldbe cleanedwith the poli~stiing

.kit provided.Readthe directions on the containers tor best polishingresults.

REMOTE CONTROLBATTERY INSTALLATION AND REMOVAL

The batteries in the remote control should be changed whenthe tran.sport is no longer un.derstaqding.or cor- rectly respondingto the commanOssent trom tlae unit.

R~e.movethe four socketcapscrews fromthe back portion ot tlae remotecontrol. Removethe back plate to expose the battery storage compartmentRefer. to the polarity drawing.w,hile inserting the batteries. Replacethe back plate and insert the four socketcapscrews.

FUSE INSTALLATION AND REMOVAL

If the MD-10does not seemto power-up,unplug the unit from the ACwall socket and check the fuse.

1.Locatethe fuse holder on the back of the unit labled FUSE.Turn the fuse holder counter clockwise and gently pull the fuse free fromthe chassis.

2.Checkto makesure the foil in the center of the fuse is still connected.If youare still unsure, measurethe fuse with an ohmmeter to determineif it is intact. TheMD-10 uses a 1 ampfast-blow fuse at l15v and a .5 ampfast- blowfuse at 220v. Shouldthe fuse need replacing, use only the fuse specified.

3.Place the fuse into .the receptacle andpushandtu.m gently clockwiseuntil the fuse holder is .~ully seated.

Plug the unit into the ACwall socket and press the Power button.

CAUTION:Should the MD-10n.ot powe~r-up and con.tinously blowfuses, unplugthe unit tro.m, the ACwall outlet andcontact yourKre-ll dealer or distributor.

15