B.Unpacking And Assembly

NOTE:Do to the extreme weight of the MDA-300or

MDA-500it is strongly advised that unpackingand placementis completedby at least two individuals.

1.Openthe box on one end.

2.Fold backthe flaps on all four sides of the boxand carefully roll it over on to the exposedend.

3.Pull the box straight up and off exposingthe foam packingmaterial.

4.Pull the foampiece from the exposedend of the ampli- tier.

5.Roll the amplifier carefully onto its handlesand re- movethe second piece of foam.

Thefollowing items will nowbe visible in each box:

4 or 5 Rubberbottoms (MDA-500has 5 feet)

NOTE:If any of these items are not included please contact your authorized dealer immediatelyf6r assis- tance.

6.Removethe plastic bag fromthe amplifier.

7.Repeatprocedurefor the secondamplifier.

NOTE:Saveall pac.kin~gmaterials..If youmust ship your MDA-300/500sinthe tuture, repackthe unit in its origi-

nal packagingto prevent transit damage.

CAUTION:Do not connect the power cords into the AC mainsbefore completingthe Installation section.

Krell Industries MDA-300/500 manual B.Unpacking And Assembly