PLACEMENT
PLACEMENT
Before you install the REFERENCE64 into your system, we
recommend that you follow these guidelines in choosing the
location. This will facilitate a clean,
1.Although well shielded, the Processor should not be placed in
close proximity to
turntables, tuners, etc.) that can create interference and induce hum.
2.As with any high quality component, ensure that the vent
openings in the chassis are free from obstruction, allowing the
Processor to dissipate heat created by its Power Supply and Class A output stage. Place the unit on a clean, level surface away from
excessive dirt or moisture. Make sure the REFERENCE64 has at least 2 inches of clearance on either side and
at the top. Components that are heat sensitive should not sit directly above the unit.
3. The REFERENCE64 does not require additional mass coupling
or isolation. You may experiment with feet or cones as long as they
do not permanently affix to the chassis. Any unauthorized modifications to the electronics or chassis will void the warranty.
PAGE 8
