ASSEMBLY
5.Locate the Processor/ Power Supply coupler assembly. This
assembly can only be installed in one direction. The wider portion
of the assembly with the mal~ connectors goes into the female connectors inthe center of the Power Supply. The female connec- tors on the power coupler go into the Processor's male connectors.
Once the coupler has been firmly pressed into place; secure it,
utilizing the four thumb screws provided. When properly seated,
the coupler edges should be parallel with the rear and top panels of the supply and Processor chassis.
CAUTION:Do not attempt to operate the unit before inserting and tightening the four floating screws to the chassis. Failure to do so can cause damage to the unit.