![](/images/new-backgrounds/1119087/11908723x1.webp)
GETTING STARTED (CONT.)
Phone Light | Shows sounds heard on the telephone line. |
Power Light | Show status of power. When the light shows: |
| STEADY = Power is ON |
| FLASHING = Low battery power |
| NO LIGHT = Power is OFF |
Power Switch: | This switch turns the power ON and OFF |
Print Switch: | This switch turns the printer ON and OFF, it is not |
| available for MP2000DX and MP2000LD models. Turn printer |
| OFF and ON for these models by pressing |
ELECTRONIC VOICE
The electronic voice is a single programmable voice message that is stored in the memory of your TDD. The message is used for calling hearing people at VOICE/TDD number. The TDD will also send your state’s voice number, so the caller will know how to contact you. You must first program this Voice Relay number by using [CTRL]+[K]. The voice message will be repeated until your TDD conversation begins (when your TDD receives signals from another TDD or you type on the key- board).
TO ENTER RELAY VOICE MESSAGE
The Memory Printer gives you one electronic voice message: “Please use TDD or Call through Relay. X XXX XXX XXXX.” To enter your relay voice and TTY number:
CTRL + K
RETURN
RETURN
CTRL + R
TTY RELAY NUM
TTY relay number’s stored.
VOICE RELAY NUM
Voice relay number’s stored.
To automatically dial the TTY relay number, press.
PLEASE WAIT.CHECK FOR DIAL TONE
DIALING XXX
CTRL + SHIFT + R Clears the relay number you have stored.
10