Manuals / Intel / Computer Equipment / Computer Hardware

Intel GA-N650SLI-DS4L SMART LAN LAN Cable Diagnostic Function, When No LAN Cable Is Attached

Models: GA-N650SLI-DS4L

1 100

Download 100 pages 30.59 Kb

Page 45

SMART LAN (LAN Cable Diagnostic Function)

SMART LAN (LAN Cable Diagnostic Function)

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software

SMART LAN

Start detecting at Port									Item Help
Pair1-2 Status	=	Open	/	Length	=	0.0m		Menu Level``
Pair3-6 Status	=	Open	/	Length	=	0.0m
Pair4-5 Status	=	Open	/	Length	=	0.0m
Pair7-8 Status	=	Open	/	Length	=	0.0m
KLJI: Move	Enter: Select			+/-/PU/PD: Value			F10: Save	ESC: Exit	F1: General Help
F5: Previous Values				F6: Fail-Safe Defaults				F7: Optimized Defaults

This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN cable. This feature will detect cabling issue and report the approximate distance to the fault or short. Refer to the following information for diagnosing your LAN cable:

When No LAN Cable Is Attached...

If no LAN cable is attached to the motherboard, the Status fields of all four pairs of wires will show Open and the Length fields show 0.0m, as shown in the figure above.

When LAN Cable Is Functioning Normally...

If no cable problem is detected on the LAN cable connected to a Gigabit hub or a 10/100 Mbps hub, the following message will appear:

Start detecting at Port.....

Link Detected --> 100Mbps

Cable Length= 30m

Link Detected	Displays transmission speed
Cable Length	Displays the approximate length of the attached LAN cable.

Note: The Gigabit hub will only operate at a speed of 10/100Mbps in MS-DOS mode; it will operate at a normal speed of 10/100/1000Mbps in Windows mode or when the LAN Boot ROM is activated.

When a Cable Problem Occurs...

If a cable problem occurs on a specified pair of wires, the Status field will show Short and thenlength shown will be the approximate distance to the fault or short.

Example: Pair1-2 Status = Short / Length = 1.6m

Explanation: A fault or short might occur at about 1.6m on Pair 1-2.

Note: Pair 4-5 and Pair 7-8 are not used in a 10/100 Mbps environment, so their Status fields will show Open, and the length shown is the approximate length of the attached LAN cable.

- 45 -

BIOS Setup

Image 45

Intel GA-N650SLI-DS4L SMART LAN LAN Cable Diagnostic Function, When No LAN Cable Is Attached, When a Cable Problem Occurs

Contents

Users Manual GA-N650SLI-DS4LGA-N650SLI-DS4L Oct. 15 MotherboardMotherboard GA-N650SLI-DS4LDisclaimer CopyrightDocumentation Classifications Identifying Your Motherboard RevisionChapter 1 Hardware Installation Table of Contents1-3-2 Installing the CPU Cooler 1-4-1 Dual Channel Memory ConfigurationChapter 4 Unique Features Chapter 3 Drivers InstallationConfiguring SATA Hard Drives Chapter 5 AppendixOptional Items Box ContentsPCIE162 GA-N650SLI-DS4L AUDIOSurround Center/Subwoofer Side Block Diagram1-1 Installation Precautions Chapter 1 Hardware InstallationProduct Specifications x 24-pin ATX main power connector Adjust PCI Express x16 frequency from 100 MHz to 150 MHz with 1-3-1 Installing the CPU 1-3 Installing the CPU and CPU CoolerCPU Socket Lever 1-3-2 Installing the CPU Cooler Direction of the Arrow Sign on the Male Push PinMale Push Pin The Top of Female Push Pin Female Push Pin 1-4-1 Dual Channel Memory Configuration 1-4 Installing the Memory1-4-2 Installing a Memory press x16 slot to re 1-5 Installing an Expansion CardA. Before You Begin 1-6 Setup of an SLI Scalable Link Interface Configuration1. Understanding the SLI Configuration Jumpers Normal Mode Normal Mode Pins 2-3 Close, Default SettingC. Connecting Two Graphics Cards B. Setting the SLI Configuration Jumpersconnector Female slots on the bridgeD. Configuring the Graphics Card Driver Place this section on the top of the bridge connectorRetention Bracket Coaxial S/PDIF Out Connector 1-7 Back Panel ConnectorsOptical S/PDIF Out Connector PS/2 Keyboard and PS/2 Mouse PortRear Speaker Out Jack Black Center/Subwoofer Speaker Out Jack OrangeSide Speaker Out Jack Gray Line In Jack BlueATX12V 1-8 Internal ConnectorsFPANEL CPUFAN1/2 ATX12V/ATX 2x2 12V Power Connector and 2x12 Main Power Connector +5V Only for 2x12 pinATX3.3VOnlyfor2x12pin ATX 6 NBFAN North Bridge Fan Header 3/4/5 CPUFAN/SYSFAN/PWRFAN Fan HeadersCPUFAN PWRFAN8 IDE1 IDE Connector 7 FDD Floppy Disk Drive ConnectorSATAII0 SATAII3SATAII2 SATAII111 BAT Battery 10 PWRLED System Power LED Header12 FPANEL Front Panel Header 13 FAUDIO Front Panel Audio Header 14 CDIN CD In Connector15 SPDIFO S/PDIF Out Header 16 SPDIFIN S/PDIF In HeaderGA-N650SLI-DS4L Motherboard 18 CI1 Chassis Intrusion Header 17 FUSB1/FUSB2 USB Headers, YellowOpen Normal Short Clear CMOS Values 19 CLRCMOS Clearing CMOS JumperChapter 2 BIOS Setup 2-1 Startup Screen A. The LOGO Screen DefaultB. The POST Screen DEL BIOS Setup/Q-FlashBIOS Setup Program Function Keys Sample BIOS Version D12-2 The Main Menu Main Menu Help„ Advanced BIOS Features „ Standard CMOS Features„ Power Management Setup „ PnP/PCI ConfigurationsDate Standard CMOS FeaturesTime IDE Channel 0 Master/SlaveDrive A Floppy 3 Mode SupportHalt on MemoryHard Disk Boot Priority Advanced BIOS FeaturesFirst/Second/Third Boot Device Password CheckNo-Execute Memory Protect Note Limit CPUID Max. to 3 NoteCPU Enhanced Halt C1E Note CPU Thermal Monitor 2 TM2 NoteIntegrated Peripherals SATA-II RAID ConfigSATA-II RAID function SATA-II 1 Primary RAIDOnboard LAN Boot ROM IDE DMA transfer accessIDE Prefetch Mode SATA-II 2 Secondary RAIDWhen No LAN Cable Is Attached SMART LAN LAN Cable Diagnostic FunctionWhen LAN Cable Is Functioning Normally When a Cable Problem OccursECP Mode Use DMA Parallel Port ModeLegacy USB storage detect Onboard Serial PortPME Event Wake Up ACPI Suspend TypeModem Ring On USB Resume from SuspendPower On By Mouse Power-On by AlarmPower On By Keyboard KB Power ON PasswordPCI 1 IRQ Assignment 2-7 PnP/PCI ConfigurationsPCI 2 IRQ Assignment BIOS auto-assigns IRQ to the first PCI slot. DefaultCurrent System/CPU Temperature Reset Case Open StatusCurrent CPU/SYSTEM/POWER FAN Speed RPM CPU Warning TemperatureCPU Smart FAN Mode CPU Smart FAN ControlSystem Smart FAN Control MB Intelligent TweakerM.I.T System Clock SettingFSB-Memory Ratio FSB-Memory Clock ModeCPU Host Frequency Mhz Actual CPU Clock MhzNB/HT-Link Voltage DDR2 Voltage ControlFSB Voltage South Bridge Voltage2-10 Load Fail-Safe Defaults 2-11 Load Optimized DefaultsLoad Optimized DefaultsSaveY/N?& ExitN Setup 2-12 Set Supervisor/User PasswordSupervisor Password User Password2-14 Exit Without Saving 2-13 Save & Exit SetupGA-N650SLI-DS4L Motherboard 3-1 Installing Chipset Drivers Chapter 3 Drivers Installation3-3 Driver CD Information 3-2 Software Applications3-5 Contact Us 3-4 Hardware InformationGA-N650SLI-DS4L Motherboard 4-1 Xpress Recovery2 Chapter 4 Unique FeaturesBefore You Begin System RequirementsA. Installing Windows XP and Partitioning the Hard Drive Installation and Configuration4. After the operating system is installed, right-click the My Computer icon on your desktop and select Manage Figure 4. Go to Computer Management to check disk allocation. Xpress Recovery2 will save the backup file to the unallocated space black stripe along the topFigure 5. Please note that if there is no enough unallocated space, Xpress Recovery2 cannot save the backup file C. Using the Backup Function in Xpress Recovery2 B. Accessing Xpress Recovery2D. Using the Restore Function in Xpress Recovery2 E. Removing the BackupF. Exiting Xpress Recovery2 4-2-1 Updating the BIOS with the Q-Flash Utility 4-2 BIOS Update UtilitiesWhat is Q-FlashTM? What is @BIOSTM?B. Updating the BIOS Copy BIOS completed - PassPlease press any key to continue Step B. Installing and Using @BIOS 4-2-2 Updating the BIOS with the @BIOS UtilityC. Options and Instructions 1. Save the Current BIOS FileClick Update New BIOS 3. Update the BIOS without Using the Internet Update FunctionThe EasyTune 5 Interface Button Information Table 4-3 EasyTuneProperties 4-4 Windows Vista ReadyBoost5-1-1 Configuring the Onboard SATA Controller 5-1 Configuring SATA Hard DrivesTo configure SATA hard drives, follow the steps below A. Installing SATA hard drives in your computerB. Configuring SATA controller mode in BIOS Setup Save changes and exit BIOS SetupStep Appendix C. Configuring RAID set in RAID BIOSTAB Navigate R Rebuild N New Array ENTER Detailcd bootdrv menu 5-1-2 Making a SATA RAID Driver DiskettePress F6 if you need to install a third party SCSI or RAID driver 5-1-3 Installing the SATA RAID Driver and Operating SystemS=Specify Additional Device ENTER=Continue F3=ExitS=Specify Additional Device Enter=Continue F3=Exit ENTER=Select F3=ExitAppendix Step5-2-1 Configuring 2/4/5.1/7.1-Channel Audio 5-2 Configuring Audio Input and OutputA. Configuring Speakers the function for each jack through the audio driverB. Configuring Sound Effect C. Configuring AC97 AudioSound Effect tab 5-2-2 Installing the S/PDIF In Cable Optional A. Installing the S/PDIF In CableS/PDIF In C. Configuring S/PDIF out S/PDIF OutB. Conneting a S/PDIF out Cable 5-2-3 Configuring Microphone Recording Select Realtek HD Audio Input in the Mixer device list 5-2-4 Using the Sound Recorder Recording the SoundPlaying the Sound 5-3-1 Frequently Asked Questions 5-3 TroubleshootingCorrectly insert the 5-3-2 Troubleshooting ProcedureCPU or CPU socket or cable might failThe graphics card T h e I D E / S A T ARegulatory Statements WEEE Symbol StatementRegulatory Notices Our Commitment to Preserving the EnvironmentChina Restriction of Hazardous Substances Table GA-N650SLI-DS4L Motherboard Appendix GA-N650SLI-DS4L Motherboard Contact Us GIGABYTE Global Service System