2-1 Startup Screen
The following screens may appear when the computer boots.
A. The LOGO Screen (Default)
<TAB>: POST Screen <DEL>: BIOS
B. The POST Screen
Function Keys
Motherboard Model BIOS Version
Function Keys:
Award Modular BIOS v6.00PG, An Energy Star Ally |
|
| ||
Copyright (C) |
|
|
| |
|
|
|
| |
. |
|
|
|
|
. |
|
|
|
|
. |
|
|
|
|
. |
|
|
|
|
<DEL>: BIOS | <F9>: XpressRecovery2 | <F12>: Boot Menu | <End>: Qflash | Function Keys |
|
|
| ||
<TAB> : POST Screen
Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system startup, refer to the instructions on the Full Screen LOGO Show item on page 42.
<DEL> : BIOS Setup/Q-Flash
Press the <Delete> key to enter BIOS Setup or to access the
<F9> : Xpress Recovery2
If you have ever entered Xpress Recovery2 to back up hard drive data using the motherboard driver disk, the <F9> key can be used for subsequent access to XpressRecovery2 during the POST. For more information, refer to Chapter 4, "Xpress Recovery2."
<F12> : Boot Menu
Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use the up arrow key < 
> or the down arrow key< 
> to select the first boot device, then press <Enter> to accept. To exit Boot Menu, press <Esc>. The system will directly boot from the device configured in Boot Menu.
Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order will still be based on BIOS Setup settings. You can access Boot Menu again to change the first boot device setting as needed.
<End> : Q-Flash
Press the <End> key to access the
- 36 - |
