Manuals / Intel / Computer Equipment / Computer Hardware

Intel GA-N650SLI-DS4L user manual Standard CMOS Features, Date, Time, IDE Channel 0 Master/Slave

Models: GA-N650SLI-DS4L

1 100

Download 100 pages 30.59 Kb

Page 39

Standard CMOS Features

2-3	Standard CMOS Features

		CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Fri, Apr 22 2007			Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level`
` IDE Channel 0 Master			[None]
` IDE Channel 0 Slave			[None]
` IDE Channel 2 Master			[None]
` IDE Channel 3 Master			[None]
` IDE Channel 4 Master			[None]
` IDE Channel 5 Master			[None]
	Drive A		[1.44M, 3.5"]
	Floppy 3 Mode Support		[Disabled]
	Halt On		[All, But Keyboard]
	Base Memory		640K
	Extended Memory		239M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Default		F7: Optimized Defaults

Date

Sets the system date. The date format is week (read-only), month, date and year . Select the desired field and use the up arrow or down arrow key to set the date.

Time

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.

IDE Channel 0 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

IDE Channel 0 Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:

•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
•	Manual	Allows you to manually enter the specifications of the hard drive when the
		hard drive access mode is set to CHS.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), CHS, LBA,
		Large.

IDE Channel 2/3/4/5 Master

IDE Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

Extended IDE Drive		Configure your IDE/SATA devices by using one of the two methods below:
•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), Large.

- 39 -

BIOS Setup

Image 39

Intel GA-N650SLI-DS4L Standard CMOS Features, Date, Time, IDE Channel 0 Master/Slave, IDE Channel 2/3/4/5 Master

Contents

Users Manual GA-N650SLI-DS4LGA-N650SLI-DS4L MotherboardGA-N650SLI-DS4L Oct. 15 MotherboardIdentifying Your Motherboard Revision CopyrightDisclaimer Documentation Classifications1-4-1 Dual Channel Memory Configuration Table of ContentsChapter 1 Hardware Installation 1-3-2 Installing the CPU CoolerChapter 5 Appendix Chapter 3 Drivers InstallationChapter 4 Unique Features Configuring SATA Hard DrivesOptional Items Box ContentsPCIE162 GA-N650SLI-DS4L AUDIOSurround Center/Subwoofer Side Block Diagram1-1 Installation Precautions Chapter 1 Hardware InstallationProduct Specifications x 24-pin ATX main power connector Adjust PCI Express x16 frequency from 100 MHz to 150 MHz with 1-3-1 Installing the CPU 1-3 Installing the CPU and CPU CoolerCPU Socket Lever 1-3-2 Installing the CPU Cooler Direction of the Arrow Sign on the Male Push PinMale Push Pin The Top of Female Push Pin Female Push Pin 1-4-1 Dual Channel Memory Configuration 1-4 Installing the Memory1-4-2 Installing a Memory press x16 slot to re 1-5 Installing an Expansion CardNormal Mode Normal Mode Pins 2-3 Close, Default Setting 1-6 Setup of an SLI Scalable Link Interface ConfigurationA. Before You Begin 1. Understanding the SLI Configuration JumpersFemale slots on the bridge B. Setting the SLI Configuration JumpersC. Connecting Two Graphics Cards connectorD. Configuring the Graphics Card Driver Place this section on the top of the bridge connectorRetention Bracket PS/2 Keyboard and PS/2 Mouse Port 1-7 Back Panel ConnectorsCoaxial S/PDIF Out Connector Optical S/PDIF Out ConnectorLine In Jack Blue Center/Subwoofer Speaker Out Jack OrangeRear Speaker Out Jack Black Side Speaker Out Jack GrayCPUFAN 1-8 Internal ConnectorsATX12V FPANEL1/2 ATX12V/ATX 2x2 12V Power Connector and 2x12 Main Power Connector +5V Only for 2x12 pinATX3.3VOnlyfor2x12pin ATX PWRFAN 3/4/5 CPUFAN/SYSFAN/PWRFAN Fan Headers6 NBFAN North Bridge Fan Header CPUFAN8 IDE1 IDE Connector 7 FDD Floppy Disk Drive ConnectorSATAII1 SATAII3SATAII0 SATAII211 BAT Battery 10 PWRLED System Power LED Header12 FPANEL Front Panel Header 13 FAUDIO Front Panel Audio Header 14 CDIN CD In Connector15 SPDIFO S/PDIF Out Header 16 SPDIFIN S/PDIF In HeaderGA-N650SLI-DS4L Motherboard 18 CI1 Chassis Intrusion Header 17 FUSB1/FUSB2 USB Headers, YellowOpen Normal Short Clear CMOS Values 19 CLRCMOS Clearing CMOS JumperChapter 2 BIOS Setup DEL BIOS Setup/Q-Flash A. The LOGO Screen Default2-1 Startup Screen B. The POST ScreenMain Menu Help Sample BIOS Version D1BIOS Setup Program Function Keys 2-2 The Main Menu„ PnP/PCI Configurations „ Standard CMOS Features„ Advanced BIOS Features „ Power Management SetupIDE Channel 0 Master/Slave Standard CMOS FeaturesDate TimeMemory Floppy 3 Mode SupportDrive A Halt onPassword Check Advanced BIOS FeaturesHard Disk Boot Priority First/Second/Third Boot DeviceCPU Thermal Monitor 2 TM2 Note Limit CPUID Max. to 3 NoteNo-Execute Memory Protect Note CPU Enhanced Halt C1E NoteSATA-II 1 Primary RAID SATA-II RAID ConfigIntegrated Peripherals SATA-II RAID functionSATA-II 2 Secondary RAID IDE DMA transfer accessOnboard LAN Boot ROM IDE Prefetch ModeWhen a Cable Problem Occurs SMART LAN LAN Cable Diagnostic FunctionWhen No LAN Cable Is Attached When LAN Cable Is Functioning NormallyOnboard Serial Port Parallel Port ModeECP Mode Use DMA Legacy USB storage detectUSB Resume from Suspend ACPI Suspend TypePME Event Wake Up Modem Ring OnKB Power ON Password Power-On by AlarmPower On By Mouse Power On By KeyboardBIOS auto-assigns IRQ to the first PCI slot. Default 2-7 PnP/PCI ConfigurationsPCI 1 IRQ Assignment PCI 2 IRQ AssignmentCPU Warning Temperature Reset Case Open StatusCurrent System/CPU Temperature Current CPU/SYSTEM/POWER FAN Speed RPMCPU Smart FAN Mode CPU Smart FAN ControlSystem Smart FAN Control MB Intelligent TweakerM.I.T System Clock SettingActual CPU Clock Mhz FSB-Memory Clock ModeFSB-Memory Ratio CPU Host Frequency MhzSouth Bridge Voltage DDR2 Voltage ControlNB/HT-Link Voltage FSB Voltage2-10 Load Fail-Safe Defaults 2-11 Load Optimized DefaultsLoad Optimized DefaultsSaveY/N?& ExitN Setup User Password Set Supervisor/User Password2-12 Supervisor Password2-14 Exit Without Saving 2-13 Save & Exit SetupGA-N650SLI-DS4L Motherboard 3-1 Installing Chipset Drivers Chapter 3 Drivers Installation3-3 Driver CD Information 3-2 Software Applications3-5 Contact Us 3-4 Hardware InformationGA-N650SLI-DS4L Motherboard System Requirements Chapter 4 Unique Features4-1 Xpress Recovery2 Before You BeginA. Installing Windows XP and Partitioning the Hard Drive Installation and Configuration4. After the operating system is installed, right-click the My Computer icon on your desktop and select Manage Figure 4. Go to Computer Management to check disk allocation. Xpress Recovery2 will save the backup file to the unallocated space black stripe along the topFigure 5. Please note that if there is no enough unallocated space, Xpress Recovery2 cannot save the backup file C. Using the Backup Function in Xpress Recovery2 B. Accessing Xpress Recovery2D. Using the Restore Function in Xpress Recovery2 E. Removing the BackupF. Exiting Xpress Recovery2 What is @BIOSTM? 4-2 BIOS Update Utilities4-2-1 Updating the BIOS with the Q-Flash Utility What is Q-FlashTM?B. Updating the BIOS Copy BIOS completed - PassPlease press any key to continue Step 1. Save the Current BIOS File 4-2-2 Updating the BIOS with the @BIOS UtilityB. Installing and Using @BIOS C. Options and InstructionsClick Update New BIOS 3. Update the BIOS without Using the Internet Update FunctionThe EasyTune 5 Interface Button Information Table 4-3 EasyTuneProperties 4-4 Windows Vista ReadyBoostA. Installing SATA hard drives in your computer 5-1 Configuring SATA Hard Drives5-1-1 Configuring the Onboard SATA Controller To configure SATA hard drives, follow the steps belowB. Configuring SATA controller mode in BIOS Setup Save changes and exit BIOS SetupStep Appendix C. Configuring RAID set in RAID BIOSTAB Navigate R Rebuild N New Array ENTER Detailcd bootdrv menu 5-1-2 Making a SATA RAID Driver DisketteF3=Exit 5-1-3 Installing the SATA RAID Driver and Operating SystemPress F6 if you need to install a third party SCSI or RAID driver S=Specify Additional Device ENTER=ContinueS=Specify Additional Device Enter=Continue F3=Exit ENTER=Select F3=ExitAppendix Stepthe function for each jack through the audio driver 5-2 Configuring Audio Input and Output5-2-1 Configuring 2/4/5.1/7.1-Channel Audio A. Configuring SpeakersB. Configuring Sound Effect C. Configuring AC97 AudioSound Effect tab 5-2-2 Installing the S/PDIF In Cable Optional A. Installing the S/PDIF In CableS/PDIF In C. Configuring S/PDIF out S/PDIF OutB. Conneting a S/PDIF out Cable 5-2-3 Configuring Microphone Recording Select Realtek HD Audio Input in the Mixer device list 5-2-4 Using the Sound Recorder Recording the SoundPlaying the Sound 5-3-1 Frequently Asked Questions 5-3 TroubleshootingCorrectly insert the 5-3-2 Troubleshooting ProcedureT h e I D E / S A T A or cable might failCPU or CPU socket The graphics cardOur Commitment to Preserving the Environment WEEE Symbol StatementRegulatory Statements Regulatory NoticesChina Restriction of Hazardous Substances Table GA-N650SLI-DS4L Motherboard Appendix GA-N650SLI-DS4L Motherboard Contact Us GIGABYTE Global Service System