Direct Console Management
When you can see the
Telnet Management
Use Telnet software to perform the management operation. The most convenient solution is using the
>telnet xxx.xxx.xxx.xxx
to connect to the device. The specified xxx.xxx.xxx.xxx is the IP address of the device. Factory default IP address is 192.168.0.2.
A welcome message and login prompt are displayed if the connection is established properly.
Login Prompt
The following figure illustrates the login screen:
User Interface
Managed 24 + 2G Switch
login:xxxx
password:xxxx
Username : admin
Factory default Password : 123
For security reason, the device supports a function to change the pass- word in setup menu. It is recommended to change the default password immediately after a successful login.