KTI Networks KS-2260 Setup for In-band Management, Quick Guide to Configure Switch IP Address

2.7.2 Setup for In-band Management

To perform an in-band management, it is necessary to connect the sys- tem to your TCP/IP network. The steps are:

1.Configure IP and SNMP related settings to the device using direct console management when you receive it first time for the installa- tion.

2.Find a proper straight-through Category 5 UTP cable (maximal length 100 meters) for the connection.

3.Connect one end of the UTP cable to the UTP port of the media converter and connect the other end to a network device, such as a switching hub, in your TCP/IP network.

4.Start your in-band management operations. For different manage- ment methods, refer to:

•Chapter 3 for Console and Telnet management

•Chapter 4 for SNMP management

•Chapter 5 for Web management

2.7.3 Quick Guide to Configure Switch IP Address

This section provides a quick instruction to configure a new IP address via Console port for the switch received for the first time. The steps are:

1.Set up console connection as described in section 2.7.1.

2.Login with default username= admin and password=123.

3.Menu selections to enter IP configuration as follows:

Main Menu

-> Switch Static Configuration

-> Administration Configuration

-> IP Configuration

-41-