Rip Fence Installation
Fence Bar Placement with Sliding Table
With the sliding table installed the front and rear fence bars must be relocated. Align the notches in the fence bars with the right miter slot in the main table.
Follow the fence installation instructions found on page nine of the
A
Figure 26
Maintenance
Caution! BEFORE CLEANING OR CARRYING OUT MAINTENANCE WORK, DISCONNECT THE MACHINE FROM THE POWER SOURCE (WALL SOCKET). NEVER USE WATER OR OTHER LIQUIDS TO CLEAN THE MACHINE. USE A BRUSH. REGULAR MAINTENANCE OF THE MACHINE WILL PREVENT UNNECESSARY PROBLEMS.
Keep the table clean to ensure accurate cutting.
Keep the table mounting area clean to ensure accurate operation of all moving parts and prevent excessive wear.
Check sliding table alignment to the table saw work surface to correct or prevent rubbing. Keep the inside (near the saw blade, etc.) clean to prevent accumulation of dust.
15
