ALWAYS DISCONNECT TOOLS.

Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters.

ALWAYS AVOID ACCIDENTAL STARTING.

Make sure switch is in “OFF” position before plugging in cord.

NEVER LEAVE TOOLS RUNNING UNATTENDED.

ALWAYS CHECK FOR DAMAGED PARTS.

Before initial or continual use of the tool, a guard or other part that is damaged should be checked to assure that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other damaged parts should immediately be properly repaired or replaced.

Table Saw Safety Rules

1.Always wear eye protection.

2.Keep hands away from the saw blade while machine is running.

3.Always use blade guard during normal cutting operations.

4.Always use splitter during normal cutting operations.

5.Use push sticks when ripping narrow stock.

6.Always use fence while ripping and miter gauge while cross-cutting.

7.Never reach over or behind saw blade while machine is running.

8.Do not remove cut-off or jammed pieces until blade has come to a full stop.

9.Disconnect machine from power source before making repairs or adjustments. 10. Do not expose saw or power cord to water or use in damp locations.

SAVE THESE INSTRUCTIONS.

Refer to them often.

3

Page 3
Image 3
Kuhn Rikon 10 Cabinet Saw Sliding Table, 10-110B/E owner manual Table Saw Safety Rules, Refer to them often