MIXER OPERATION 3000STOPR005810R082503 Always refer to Operating Safety Precautions and Safety Decal sections of this manual before operating this mixer.
FILL LEVEL
Do not overload mixer! Overloading causes excessive horsepower requirements, increased strain on mixer driveline and poor mixer performance.
The design of the Reel Auggie requires that there be adequate space to allow the feed to move in and around the Reel chamber. If the Reel is completely covered, it cannot efficiently mix the materials. The Reel Cross Tubes should always be visible at the top of their rotation to allow this mixing space.
Do not exceed full line as shown in diagram.
UNLOADING
After the ration has been thoroughly mixed, open the mixer door to begin unloading. The discharge door opening determines the flow of feed from the mixer. The door must be opened far enough to prevent separation of materials. To stop the flow of feed, close the door, then shut off the mixer.
OPTIONS:
ELECTRIC DOOR CONTROL-
This option allows the discharge door to be operated from a location away from the mixer, or when installation location requires remote door operation.
ELECTRONIC SCALE -
Allows accurate ration weight while loading, also scale indicator can be located away from mixer if a more conve- nient location is preferred.
Refer to the manufactures operator manual for your specific scale option operation and maintenance.
HAY MAXX SYSTEM - 
A bolt in option designed for the user who wants to add long stem hay more effectively to the ration. The Hay Maxx handles small and large square bales,
KUHN KNIGHT INC. | 21 |
1501 West 7th Ave. Brodhead, WI |
|
701 Cherry Ave. Greeley, Co. 80632
