3000STOPR005810R082503
INSPECTION & ADJUSTMENTS
ALWAYS STOP MIXER AND LOCK OUT POWER BEFORE SERVICING, REPAIRING, OR CLEANING. IF WORK MUST BE PERFORMED INSIDE THE MIXER, STOP MIXER AND LOCK OUT POWER AND PUT A PROTECTIVE COVER OVER THE AUGER KNIVES TO AVOID INJURY. THE HOPPER FLOOR MAY BE SLIPPERY, AND THE REEL AND AUGERS WILL SPIN WHEN STEPPED ON. USE CAUTION WHEN STEPPING OR STANDING INSIDE THE UNIT. USE SAFE SHOP PROCEDURES AND EXERCISE CAUTION WHEN WORKING ON THIS MIXER!
INSPECTION & ADJUSTMENTS:
Electronic Scale (optional)
Scale Indicator: Refer to the electronic scale operators manual for adjustment information. The operator’s manual for the Electronic Scales should be kept with this manual. Additional scale manuals may be obtained through Kuhn Knight Inc.
Load cells and weigh bars should be kept clean, dry & lubricated to insure dependability.
Check arm assembly must be free to slightly rotate by hand when mixer is on level ground (see diagram), with mounting bolts tight.
Vertical check bolts must not be tight (and should be free to rotate by hand) and need not less than 1/16” and no more than 3/32” free play when properly adjusted on level ground.
PIN CHECK BEARING should be centered on the pin when mixer is on level ground. Adjust- ment can be made by loosening the mounting bolts, centering pin check assembly on the pin and tightening the mounting bolts. If bushing cannot be centered load cells may require adjustment.
Normal scale activity:
Some warm up scale drift may occur after the scale is turned on but should zero balance within
Weight may change slightly due to terrain changes when mixer is moved.
KUHN KNIGHT INC. | 23 |
1501 West 7th Ave. Brodhead, WI |
|
701 Cherry Ave. Greeley, Co. 80632