Kuhn Rikon 3020, 3095, 3036, 3025, 3015, 3060, 3070, 3042, 3050, 3030 instruction manual Safety Decals

3000STOPR005810R082503

SAFETY

SAFETY DECALS

SAFETY DECALS ARE PLACED ON THIS UNIT FOR THE PROTECTION OF THE OPERATOR OR ANY PER- SON NEAR THE UNIT.

Be Sure everyone who operates the mixer understands all the information, warning, caution and danger decals.

Keep The Decals Clean so they are readable. This applies to all caution, warning, and danger decals.

It is the OWNER’S RESPONSIBILITY to provide information for safe operation of this machine.

Replace any damaged or worn decal. Once any part of a decal becomes non-readable, it should be replaced. The part numbers for the decals are located in the lower RH corner of the decal, and listed in this manual on the following pages. Replacement decals may be ordered through your dealer or the address below.

When replacing decals, be sure the surface area is clean and dry, peel the backing off the decal, and apply to the Mixer. Be sure to wipe with a clean cloth to rub out all air bubbles to assure a good seal. For best adhesion decals should be applied in temperatures of 50° (f) or warmer.

Complete sets of decals (including information decals) can be ordered by using the following part numbers:

UNIT PART NO.

3015 174-633

3020 174-630

3025 174-647

3030 174-650

3036 173-361

3042 173-362

3050 174-636

3060 174-639

3070 174-702

3095 175-013

6