Kyocera 3035 manual Installing the Battery, Charging the Battery, aligned. Do not force

Installing the Battery

Installing the Battery

Before using your QCP 3035 phone, follow the steps below to install the battery.

1. Align the battery door to the groove on the bottom of the phone. Ensure that the battery slips into the small groove located in the middle of the phone casing.

2.Push the battery in until it clicks closed. The battery should be snug. Check and repeat if battery door is not

aligned. Do not force.

Charging the Battery

Before using your phone, fully charge the battery. Connect the AC Adapter to the proper jack on the bottom of the phone as shown below, then connect the adapter’s plug to a wall outlet.

7 prs

8 tuv

0

#

9 wxyz

Note	You must have at least a partial charge in the battery to make or receive calls, regardless of
	whether or not the AC Adapter is connected to the phone.

Tip

The battery icon is animated as the battery is charging. The battery is fully charged

when the battery icon looks like . You can safely recharge the battery at any time, even if it has a partial charge.

Turn off the phone before charging the battery with the AC Adapter. The battery takes less time to charge if the phone is turned off.

2 Reference Guide for the QCP 3035 Phone