Kyocera 3250 manual Training voice recognition, Using voice features with hands-free car kits

Training voice recognition

If your phone is having trouble recognizing your voice, you can train it with the commands “Yes,” “No,” and

“Wake up.”

1.Select Menu → Settings → Voice Services.

2.Select Voice Training.

3.Read the message and press .

4.Select Train All.

–Follow the prompts for each word until training is complete.

Using voice features with hands-free car kits

You can use voice commands to make a phone call or to answer the phone only if your phone is connected to a professionally installed Kyocera hands-free car kit (sold separately).

Note: The following features apply only to installed hands-free car kit unless noted.

To shop for hands-free car kits, visit www.kyocera- wireless.com/store or call (800) 349-4188 (U.S.A. only) or (858) 882-1410.

Waking up the phone

If your phone is connected to a Kyocera installed hands-free car kit, you can use the voice command to activate the phone to make a phone call.

Note: Voice Wake-up does not work with Keyguard active.

To activate the Voice Wake-up setting:

1.Select Menu → Settings → Voice Services → Voice Wake-Up → With ext. pwr.

2.Select Menu → Settings → Keyguard →

Disabled, then press .

To wake up the phone:

1.Say “Wake Up” and listen for a tone.

2.Say “Wake Up” again until you hear two tones.

If the phone does not recognize your “Wake up” command, see “Training voice recognition” on page 42.

42 Using Voice Recognition