Kyocera 5135 Making a call, Answering a call, Making and Answering Calls, Redialing a number

2MAKING AND ANSWERING CALLS

Making a call

1.Make sure you are in an area where the signal can be received. Open the flip and look for the

§symbol on the home screen.

Note: The more bars you see in this symbol, the clearer the reception will be. If there are no bars, try to move to where the reception is better. In some cases, this can be as simple as turning to face a different direction.

2.Enter the phone number.

3.Press .

Note: If your phone cannot locate a signal for 15 minutes, it changes to power-save mode. If you see the message “Power Save Mode” and a

on the screen, press any key to return to normal operating mode and try your call again.

4.When you are done, close the flip or press

to end the call.

Exception: You must press to end the call if you are using the phone for a data or modem call or if an accessory such as a headset or portable hands-free car kit is attached.

Redialing a number

To redial the last number called, press twice.

Answering a call

When a call comes in, the phone will ring or vibrate.

•To answer the call, open the flip. If the phone

continues to ring, press .

You can set the phone to answer in two ways: Answer automatically when you open the flip or

don’t answer until you press . To change the setting, see “Changing the way you answer calls” on page 9.

To change the ringer, see “Choosing a different ringer” on page 29.

Answering calls hands-free

If your phone is attached to a portable hands-free car kit (sold separately), you can set it to answer an incoming call after five seconds.

•Select Menu → Settings → Accessories → Auto-Answer → After 5 seconds.

8 Making and Answering Calls