Kyocera 5100 Series, 5135 manual Setting an alert for roaming charges, Controlling network roaming

2.Select an option and press .

–Automatic automatically switches the phone between digital and analog.

–Analog only sets the phone to work in analog mode only.

–Analog call forces a call into analog mode for the duration of the next call.

–Digital only sets the phone to work in digital mode only.

Setting an alert for roaming charges

Use this setting if you want the phone to alert you if you roam outside of your home service area.

1.Select Menu → Settings → Network →

Roam/Srvc Alert.

2.Select an option and press .

–Disabled will not alert you if you roam outside your home service area.

–When no service alerts you with three tones, decreasing in intensity, when service is lost. When service is acquired again, you will hear three tones increase in intensity.

–On roam change alerts you with two tones, decreasing in intensity, when roaming service is acquired. When home area service is acquired again, you hear three tones, increasing in intensity.

–On any change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.

Controlling network roaming

This setting allows you to control the phone’s roaming feature by specifying which signals the phone will accept.

1.Select Menu → Settings → Network →

Roam Option.

2.Select an option and press .

–Automatic (recommended setting) accepts any system the phone service provides.

–No roaming prevents you from making or receiving calls outside of your home service area.

User Guide for the Kyocera 5135 Phone 15