Kyocera 5135 manual Receiving data or faxes, Selecting digital or analog mode, Timing your calls

Recent Calls

This timer displays the total number and duration of recent calls you have made and received since the last time you reset the timer.

1. Select Menu → Settings →

Call Information → Recent Calls Timer.

2.Press to select Reset. This resets the timer to zero.

Timing your calls

If you want to know how long you are spending on a call, you can set up your phone to beep

10 seconds before each minute.

•Select Menu → Settings → Sounds → Minute Alert → Enabled.

Receiving data or faxes

Your phone can receive certain data or faxes, depending on the system sending the information.

However, to receive data or faxes, you must switch from voice mode to data/fax mode.

(Your network may not support these call types. Check with your service provider.)

Note: You cannot receive voice calls while the phone is in data/fax mode.

1.Select Menu → Settings → Network → Data/Fax Calls In.

2.Press to select an option:

–Voice Only—Allow only voice calls.

–Fax, next call—Set the phone to fax mode for the next incoming call or the next

10 minutes.

–Data, next call—Set the phone to data mode for the next incoming call or the next 10 minutes.

–Fax, until off—Force the phone into fax mode until the phone is turned off.

–Data, until off—Force the phone into data mode until the phone is turned off.

Selecting digital or analog mode

This setting allows you to force the phone into either digital or analog mode. This is useful if you are in an area that borders on digital service and the automatic feature is causing the phone to keep switching between modes.

1.Select Menu → Settings → Network →

Digital or Analog.

14 Making and Answering Calls