Basic Operation
3-33
3Select a destination (user name). Either
press the number key or use the
numeric keys to enter the user number
and press [Enter].
NOTE: If the scanner default setting for Selec. of senders (users) is set to [On], user number 001
will automatically be selected.
If a password was entered when the user was registered, the password input screen is displayed.
Input the password and press [Enter].
4Press [Address Book].
5Press [S] or [T], select the desired
destination FTP server and press [Enter]
([Add dest.]). Log in to the destination
FTP Server.
When a destination is selected, an is
displayed next to it in the Select column
to the right of the Address column.
6If destination FTP server is selected
where in Skip Auth. info Input (Modifying
Common Address Book on page2-30 )
has been set to [Off], at the following
step enter the usename and password
and press [Close].
Username entry
1Press [Change #] for the username.
2Input the username.
3Press [End].
Password entry
1Press [Change #] for the password.
2Enter the password.
3Press [End].
7Press [Close].
Stop
n
ame.
User number
(with #key)
Enter
Place the original and select destination.
Scan to FTP-Sending
Destination
Original
11×8½"
Address
Select
Auto
Scanning
Basic Quality
Auto size
Select
Send Size
Top Edge
Orig. Set
08/0
8
Book
Orig.Size Direction
Resoluti on
Ready to scan. ( )Full-Color
Cont. TX toRegister Prgrm
200dpi
Delete
Close
Address Addr ess
Properties
Up
Down
FTP01
Select:
Enter
0.0-9
GHI
O
PQR
X
YZ
User Name & Password
On
Back
Change #
Change #
Password
User name
Destination:ftp001