Preparation for Usage
2-6
2Adjust the sliders to fit the width of the paper.
3Insert the paper along the sliders into the tray until it
stops.
Ensure that the sliders are flush against the edges of
the paper.
IMPORTANT: Before loading postcards and other
types of thick paper that may be curled, straighten out
the paper. The paper may not be fed depending on the
paper quality.
To print on both the front and back side of the post
card, be sure to print the back side before printing the
address side.
Only load paper into the MP tray when it is in use.
Avoid leaving paper in the MP tray.
Ensure that the loaded paper does not exceed the
level indicated. Overloading may cause paper jams.
When loading envelopes, place with the envelope flap
closed and keep the printing side face-up. Insert
envelopes against the guide with the flap on the front
or left side until they stop.