Preparation for Usage
2-24
11 Press [S] or [T] to select IP Address
and press [Change #].
12 Enter the IP address using the numeric
keys. Input the address for the 3 digits
displayed in reverse black and white and
press the # key.
Verify the 3 digits entered # key.
13 Input the address for the next 3 digits displayed in reverse black and white and press the # key.
To correct an address entry, press the # key to select the 3 digit address you would like to correct
and reenter the address using the numeric keys.
14 After inputting the rest of the address in the same manner, press [Close]. The display returns to the
TCP/IP screen.
Press [Back] to delete the entered address and set the previous address.
15 Press [S] or [T] to select Subnet Mask and press [Change #].
16 Set the address in the same manner as Steps 12 - 14 to set the IP address.
17 Press [S] or [T] to select Gateway and press [Change #].
18 Set the address in the same manner as Steps 12-14 to set the IP address.
19 Press [Close] after all settings are complete.
20 Press [Close].
21 Press [Close]. The display returns to Printer mode.
Included Printer Utilities
This product includes the following printer utilities Install them as necessary. For details, refer to the
manual included with each utility.
KM-NET for Clients
KM-NET for Direct Printing
•IC-Link
KM-NET VIEWER
KM-NET VIEWER for Web Edition
•KM-NET KPrint
KM NET Quick Setup
Change #
Close
DHCP On
BOOTP On
IP Address 0. 0. 0. 0
Subnet Mask 0. 0. 0. 0
Gateway 0. 0. 0. 0
Back
Setting I tem Value
I
nterface - Network
IP Address
.10 (with #key)
Back
Printer m enu- I nterface - Networ k - TCP/IP
.0.0.0
Confirm p er 3 lines pressing # key.