Preparation for Usage

2-22

Preparing the Printer

Network (TCP/IP) Settings

To use this device as a network printer, first set the device IP address.
NOTE: Set the IP address according to the operating environment. Obtain this address from your
network administrator.
For environments that use DHCP or BOOTP to automatically assign the IP address, this setting is
not required because the DHCP or BOOTP setting is enabled by default.
1Press the Printer key.
2Press [Printer Menu].
3Press [Interface].
4Press [Network].
Printer
Menu Cancel
Ready to print.
Printer menu
Print Sta-
tus Page
Interface
Emulation
Page Set
Print
Paper
RAM DISK
Mode
Select item.
Font
Color Mode
Handling
Quality
Others
Interface
NetWare
Parallel Network
Change #
Setting Item Value
On
TCP/IP On
Ethertalk On
Network Status Page Off
USB
Printer menu