7.Click Use the following IP Address.
To assign an IP address, enter the following IP address, Subnet mask, and Default gateway IP addresses:
IP address: | 192.168.0.2 |
Subnet mask: | 255.255.255.0 |
Default gateway: | 192.168.0.1 |
8.Click OK to close the Internet Protocol (TCP/IP) Properties window.
9.Select OK to close the Local Area Connection Properties window.
Note: It may take several seconds for this window to close.
Prepare Your Router for Firmware Recovery–Windows 2000
1.Using the tip of a paperclip, press and hold the RESET button, while simultaneously plugging in the power supply via the power adapter receptor.
Receptor for Power
RESET Button
LAN Ports
7
