La Crosse Technology WS- 1912 Storm Warning Threshold Value Setting, Storm Alarm On/ Off Setting

Models: WS- 1912

1 20
Download 20 pages 50.96 Kb
Page 10
Image 10
STORM WARNING THRESHOLD VALUE SETTING

STORM WARNING THRESHOLD VALUE SETTING

You may also define a switching sensitivity value for the Storm warning display at a decrease of air pressure from .09 inHg to .27 inHg (3-9 hPa) over 6 hours (Default 0.15 inHg (5 hPa)).

Flashing

1.The threshold value will start flashing.

2.Use the + or MIN/MAX key to select the value.

3.Confirm with the SET key and enter the STORM ALARM ON/ OFF SETTING.

STORM ALARM ON/ OFF SETTING

Note: the storm alarm ON/OFF setting is not available on this model. Skip and exit this setting by pressing the SET key.

TO EXIT THE MANUAL SETTING MODE

To exit the manual setting anytime during the manual setting modes, press the HISTORY key anytime or wait for the automatic timeout. The mode will return to the normal time display.

19

WEATHER FORECAST AND WEATHER TENDENCY

WEATHER FORECASTING ICONS

Weather icons in the third section of LCD can be displayed in any of the following combinations:

Sunny

Cloudy with sunny intervals

Rainy

For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather station to register. However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are already at their extremes.

The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rainy.

Note:

After setting up, readings for weather forecasts should be disregarded for the next 48-60 hours. This will allow sufficient time for the Weather station to collect air pressure data at a constant altitude and therefore result in a more accurate forecast.

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather station has been designed for use. In areas that experience sudden changes in weather (for example from sunny to rain), the Weather station will be more accurate compared to use in areas where the weather is stagnant most of the time (for example mostly sunny).

If the Weather station is moved to another location significantly higher or lower than its initial standing point (for example from the ground floor to the upper floors of a house), discard the weather forecast for the next 48-60 hours. By doing this, the Weather Station

20

Page 10
Image 10
La Crosse Technology WS- 1912 instruction manual Storm Warning Threshold Value Setting, Storm Alarm On/ Off Setting, Sunny