Philips DBS-EX23-530 manual Alarm Relay Controls, =Off Alarm relay does not close

Programming Reference Alarm Settings

Alarm Relay Controls

Parameter	Yellow Alarm Relay
Description	Determines whether the system closes the alarm relay on the ISDN
	MDF card in the event of yellow alarms.
	The alarm relay can be connected to an external alarm device such
	as a buzzer. The external alarm device must be purchased sepa-
	rately; it is not provided with the DBS ISDN.
	(The “Yel Alm Det” parameter on page 4-21determines how many
	yellow alarms occur before the relay closes.)
Programming	Master cabinet: FF1 9# 4# 4# 4# 1# (0-1)#
	Slave cabinet: FF1 9# 4# 5# 4# 1# (0-1)#
Options	0=Off (Alarm relay does not close.)
	1=On (Alarm relay closes.)
Parameter	Red Alarm Relay
Description	Determines whether the system closes the alarm relay on the ISDN
	MDF card in the event of red alarms.
	The alarm relay can be connected to an external alarm device such
	as a buzzer. The external alarm device must be purchased sepa-
	rately; it is not provided with the DBS ISDN.
	A red alarm indicates a loss of frame (OOF) or loss of signal has
	continued for over 2.5 seconds.
	(The “Red Alm Det” parameter on page 4-21determines how
	many red alarms occur before the relay closes.)
Programming	Master cabinet: FF1 9# 4# 4# 4# 2# (0-1)#
	Slave cabinet: FF1 9# 4# 5# 4# 2# (0-1)#
Options	0=Off (Alarm relay does not close.)
	1=On (Alarm relay closes.)

Revised April 2000 DBS-EX23-530 4-25