Appendix A. | Section |
# | Typical Info for CO | Comments (examples) |
|
|
|
8 | Long distance Carrier | Identifies the carrier who will provide long |
| InterLATA (PIC) | distance access. |
9 | Long distance Carrier | Identifies the carrier who provides access for con- |
| (IntraLATA) (LPIC) | nections that are not local but are still within the |
|
| local LATA. |
1 | Request date of installation |
|
0 |
|
|
1 | Facility type | ISDN PRI |
1 |
|
|
1 | Facility quantity | 1 or 2 spans |
2 |
|
|
NOTE: The following items must be provided on a per span basis. | ||
|
|
|
1 | Signaling code | |
3 |
|
|
1 | Line coding | B8ZS (Binary 8 Zero Substitution) |
4 |
|
|
1 | Framing Format | ESF (Extended Superframe) |
5 |
|
|
1 | Bearer configuration | Voice or Voice/Data |
6 |
|
|
1 | Quantity of B (bearer) | 23B + 1D - Max. setting (must have 1 D channel) |
7 | channels | Or XB + 1D where X is |
1 | Call type | Two Way |
8 |
|
|
1 | Quantity of phone numbers | A block of 20 numbers is generally assigned. |
|
|
|
9 |
| Note: With DID, the total number of telephones |
|
| will exceed the total number of B channels. |
2 | Number of incoming digits | Select 4 digits. Used with DID |
0 | to CPE (Customer Premise |
|
| Equipment - DBS) |
|
2 | ISDN PRI Protocol | 5ESS Custom, |
1 |
| 4ESS |
2 | Glare Resolution | CPE yield to CO |
2 |
|
|
2 | Channel selection used by | |
3 | CO |
|
Page | DBS Manual - Revised April 2000 |