Philips DBS-EX23-530 manual Send as is, Determine Type and Plan

Quick-Start Programming Programming Initial ISDN Options

Address	FF1 9# 4# 4# 5# 5# (0-1)# ISDN International Dial Code
	Deduction
Options	0-Send as is
	1-Deduct 011 from the code

Address	FF1 9# 4# 4# 5# 6# (0-1)# ISDN Long Distance
	Code“1”Deduction
Options	0-Send as is
	1-Deduct “1” from the code

Address	FF1 9# 4# 4# 5# 7# (0-1)# ISDN Type and Plan Option
Options	0-Determine Type and Plan
	1-Always Type and Plan set to Unknown/Unknown

Slave Cabinet Set-Up

Note:Refer to “Typical Central Office Configurations” on page 3-10for setting below options. Default setting are In BOLD

Special Installation for adding second cabinet. If you are adding a second cabinet (slave) to an existing installation that has a Primary Rate span configured, you must re-enter the configuration settings for the ISDN channels in the Master cabinet. The re-dimensioning of the system to the new double cabinet (master/slave) configuration causes the address of FF1 9# 4# 4# 1# 2# (0-23) to be reset to the default value of zero (0).

9. Set up slave span:

Address	FF1 9# 4# 5# 5# 1# (0-1)# Network Type
Options	0-Public
	1-Private

Address	FF1 9# 4# 5# 5# 2# (0-1)# Auto Progress
Options	0-Disable
	1-Enable

Revised April 2000 DBS-EX23-530 3-7