Philips DBS-EX23-530 manual =Off

Programming Reference Trunk Settings

Parameter	Multiple DID/DNIS
Description	This programming address controls two functions.
	If only analog trunks are used, a “1” turns on multiple DID num-
	bering. Multiple DID numbering allows the assignment of one
	DID number to multiple extensions. If one DID number is
	assigned to multiple stations, the stations ring simultaneously
	when the DID number is dialed. More than one DID number can
	be assigned to a single extension.
	If ISDN trunks are used, a “1” also turns on multiple Inbound
	ISDN DID numbering. Multiple Inbound DNIS numbering allows
	the assignment of one ISDN DID number to multiple extensions.
	If one ISDN DID number is assigned to multiple stations, the sta-
	tions ring simultaneously when the DID number is dialed. More
	than one DID number can be assigned to a single extension.
	Up to 500 DID numbers can be assigned in each system; also, up to
	500 Inbound ISDN DID numbers can be assigned. When Inbound
	ISDN DID numbering is used, both the Inbound DID number table
	and the DID table are used. See “Inbound ISDN DID Assignment”
	on page 4-29for more information on assigning DNIS numbers.
Programming	FF1 2# 1# 32# (0-1)#
Options	0=Off
	1=On

Revised April 2000 DBS-EX23-530 4-33