
Alarm Settings | Programming Reference |
Alarm Transmission Options
Parameter | Yellow Alarm Send |
|
|
Description | Determines whether the DBS sends a yellow alarm signal to the |
| CO. |
|
|
Programming | Master cabinet: FF1 9# 4# 4# 1# 7# |
| Slave cabinet: FF1 9# 4# 5# 1# 7# |
|
|
Options | 0=No |
| 1=Yes |
|
|
Parameter | Red Alarm Detection |
|
|
Description | The default value for this parameter is determined by network |
| specifications. It should not be changed. |
| If a red alarm occurs, the “CFA” LED on the ISDN card lights. |
| Also, if the “Red Alm Relay” parameter (page |
| the alarm relay on the ISDN MDF card closes. |
| Note: For changes to this parameter to take effect, the system |
| must be powered down, then back up again. |
|
|
Programming | Master cabinet: FF1 9# 4# 4# 2#1# |
| Slave cabinet: FF1 9# 4# 5# 2# 1# |
|
|
Options | |
|
|
Values | 0=4 |
| 1=6 |
| 2=8 |
| 3=10 |
| 4=12 |
| 5=14 |
|
|
| Revised April 2000 |