Programming Reference | Alarm Settings |
Parameter | Relay Reset |
|
|
Description | Determines whether the ISDN alarm relay is cleared (opened) auto- |
| matically or manually. |
| If cleared automatically, the relay is opened approximately one sec- |
| ond after the alarm condition ceases. |
| If cleared manually, the relay can be opened by entering the Alarm |
| Relay Clear code. |
| To enter the Alarm Relay Clear code, first enter the programming |
| authorization code (#98 9999), then enter one of the following |
| codes: |
| (Master cabinet: ON/OFF #94 8) |
| (Slave cabinet: ON/OFF #95 8) |
|
|
Programming | Master cabinet: FF1 9# 4# 4# 4# 6# |
| Slave cabinet: FF1 9# 4# 5# 4# 6# |
|
|
Options | 0=Auto |
| 1=Manual |
|
|
Revised April 2000 |
