| Before You Begin |
Before You Begin
Before you begin programming, you should be familiar with resetting the DBS and performing the “ISDN Data Reset” command. The following paragraphs explain when these two procedures are used.
The ISDN Data Reset command. If you are installing ISDN while you are upgrading to a new DBS release, perform the “ISDN Data Reset” before you begin ISDN programming.
Manually Resetting the DBS. Many of the ISDN programs require a manual reset to take effect. Program all of the
Note:COP 1.07 or later is required on the PRI Card with
Revised April 2000 |
