MANUAL SETTINGS:
Press and hold the SET key for 3 seconds to enter the SET mode. The display will automatically return to Mode 1 display in 30 seconds if a key is not pressed.
While in SET mode, each press of the SET key will advance to the next SET mode item:
1.LCD contrast setting
2.Manual time setting
3.12/24 hour time display
4.Date setting
5.°F/°C temperature unit setting
6.Wind speed unit
7.Rainfall unit setting
8.Air pressure unit setting
9.Relative pressure reference value setting
10.Weather tendency threshold value
11.Storm warning threshold value
12.Alarm On/ Off setting
13.Wind direction display type
14.Factory Reset
LCD CONTRAST SETTING
The LCD contrast can be set within 8 levels, from "Lcd 1" to "Lcd 8" (default setting is "Lcd 5"):
1.Press and hold the SET key for 3 seconds; the contrast level digit will start flashing.
2.Press the ▲UP ARROW key or ▼DOWN ARROW key to adjust the level of contrast.
3.Press the SET key to confirm and to enter the MANUAL TIME
SETTING.
MANUAL TIME SETTING:
The time will be updated automatically with the time from the computer when the display is synchronized with the USB transceiver and connected to the Heavy Weather Pro software. The time can be set manually by following the steps below.
1.The hour digit will flash.
2.Press the ▲UP ARROW key or ▼DOWN ARROW key to set the hour.
3.Press the SET key to switch to the minutes. The minute digit will flash.
4.Press the ▲UP ARROW key or ▼DOWN ARROW key to set the minute.
5.Press the SET key to confirm and to enter the
