La Crosse Technology WS-7059-SU Viewing and Operating with Multiple, Remote Sensor Units

III.OUTDOOR REMOTE CONTROL SENSORS TX4U included (others are optional)

The WS-7059SU is able to receive signals from 3 different remote sensors. When the TX4U and/or other units are set up the indoor LCD will display the remote sensors when the “IN/OUT” button is pressed. The weather station will switch to display “OUTDOOR” when a remote sensor is selected and will also show which number of remote sensor is displayed in between the temperature and humidity displays.

Extra sensors can be purchased through the same dealer as this unit. A TX4U will monitor the temperature and humidity, a TX3U will monitor the temperature only and the TX3UP will monitor the temperature only via a probe (for soil or water temperature).

Note: When setting up multiple units it is important to insert batteries first into all the remote sensors and then into the weather station. You should not press any buttons for the first 10 minutes of operation. Transmission problems will arise if this is not done correctly.

IV.	VIEWING AND OPERATING WITH MULTIPLE
	REMOTE SENSOR UNITS

1.To view the outdoor data press and release the “IN/OUT” button. If there is more than one remote sensor unit in use a squared number will appear between the outdoor temperature and the humidity.

2.To switch to a different remote sensor unit press and release the “CH/+” button.

18