SET-UP GUIDE
1.Have the weather station and remote sensor 3 to 5 feet apart.
2.Batteries out of both units for at least 10 minutes.
3.Place the batteries into the remote sensor FIRST then place batteries into the weather station NEXT.
(All remote sensors must be started before the weather station)
4.DO NOT PRESS ANY BUTTONS FOR 10 MINUTES
In this time the weather station and sensor will start to talk to each other and the display will show both the indoor temperature and an outdoor temperature ALTERNATELY. If the weather station does not display both temperatures after the 10 minutes, Please retry the start up as stated above. After both indoor and outdoor temperatures are displayed for 10 minutes you can place your remote sensor outdoors and set your time.
The remote sensor should be placed in a dry, shaded area. The remote sensor has a range of 80 feet. Any walls or objects that the signal will have to pass through will reduce distance. An outdoor wall or window will have 20 to 30 feet of resistance and an interior wall would have approximately 20 feet of resistance. Your distance plus resistance should not exceed 80 ft. in a straight line. For best results try and keep the remote sensor on an exterior wall of the room that you have the weather station in.
5
