La Crosse Technology WS-7078UF instruction manual Program Mode, Function Keys

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or either the “IN” or the “OUT” buttons are pressed during programming modes the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program sequence during the programming of sections “A” through “G”, you can advance to step 4 of the next program section. If you do leave the program sequence (or want to program a specific setting) follow each instructional step to program that setting. The programming sequence is as follows:

•12 or 24 Hour Time Setting

•Time Zone Setting

•Daylight Saving Time(DST) Setting

•Time Setting

•Day, Date and Year Setting

•°F or °C Setting

•LCD Contrast Setting

FUNCTION KEYS

The Secondary Buttons are located directly below the Primary Buttons, and behind the La Crosse Technology shield on the face of the unit. To access the Secondary Buttons: place a solid object in the slot (above the shield) and gently pull out and down.

Primary Buttons

Secondary Buttons

7