Setting the USB Connection Mode

Set the device to which the camera is connected with the USB cable.

Make sure to set the USB Connection mode before connecting your camera to the computer. You cannot perform the following setting if the camera is connected to your computer with the USB cable.

1

2

Turn your camera on.

Press the 3 button in Q mode.

The [W Setting] menu appears.

When you press the 3 button in A mode, press the four-way controller (5) once.

3 Use the four-way controller (23) to select [USB

Connection].

4 Press the four-way controller (5).

A pull-down menu appears.

5 Use the four-way controller (23) to select [MSC].

6 Press the 4 button.

The setting is saved.

Setting

2/3

 

USB Connection MSC

 

Video Out

PTP

 

Eye-Fi

 

 

Brightness Level

5 sec.

 

Power Saving

 

Auto Power Off

3min.

 

MENU Cancel

OK OK

8

 

 

Connecting to a Computer

215

Page 217
Image 217
Pentax 14176, 14191, 14161 Setting the USB Connection Mode, Turn your camera on Press the 3 button in Q mode, 215