Pentax 14191 Changing the Start-up Screen, To choose the image for the start Up screen, 205

In Q mode, press the four-way controller (3). The Playback Mode Palette appears.

Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is turned on.

You can choose any of the following images as the start-up screen:

-The Guide Display Start-up Screen showing a guide to the shooting modes and buttons

-One of the 3 pre-installed images

-One of your own images (compatible images only)

1

2 Use the four-way controller (2345) to select ^(Start-up

Screen).

	Start-up Screen	2/2
For setting a captured
image as the Start-up
Screen
MENU Cancel		OK OK

3 Press the 4 button.

4	The image selection screen appears.
	Use the four-way controller (45)		100-0017
	to choose the image for the start-
	up screen.
	Only images available for the start-up
	screen are displayed. You can also choose
	one of the 3 pre-installed images or the	MENU Cancel	OK OK
	Guide Display Start-up screen already

stored in the camera.

5 Press the 4 button.

The start-up screen is set.

7 Settings

205