Pentax 14176, 14191, 14161 specifications Saving the Settings Memory, 131

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the camera is turned off.

For some camera settings, the Memory function is always set to O(On) (the settings are saved when the camera is turned off), while for others you can choose Oor P (Off) (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O or P in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)

If you select O, the settings will be saved in the status they were in immediately before the camera was turned off. If you select P, the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is O or P.

Item	Description	Default	Page
		Setting
Face Detection	The Face Detection mode set with the I button	P	p.72
Flash Mode	The flash mode set with the four-way controller (4)	O	p.102
Drive Mode	The drive mode set with the four-way controller (2)	P	p.92
			p.93
Focus Mode	The focus mode set with the four-way controller (5)	P	p.104
Zoom Position	The zoom position set with the zoom lever	P	p.78
MF Position	The manual focus position set with the four-way	P	p.105
	controller (23)
White Balance	The [White Balance] setting on the [A Rec. Mode]	P	p.112
	menu
Sensitivity	The [Sensitivity] setting on the [ARec. Mode] menu	P	p.115
EV	The [EV Compensation] setting on the	P	p.110
Compensation	[A Rec. Mode] menu
AE Metering	The [AE Metering] setting on the [A Rec. Mode]	P	p.114
	menu
Digital Zoom	The [Digital Zoom] setting on the [A Rec. Mode]	O	p.80
	menu
DISPLAY	The information display mode set with the	P	p.22
	4/Wbutton
	If a new SD Memory Card is inserted when O (On)
File No.	has been selected, file numbers are assigned	O	—
	sequentially

3 TakingPictures

131