Pentax 14191, 14176, 14161 specifications Setting the Shake Reduction Function, 118

Use the four-way controller (23) to select [Shake Reduction].

Press the four-way controller (5). A pull-down menu appears.

Both optical and electronic shake reductions are used.

No shake reductions are used.

Use the Movie SR function (p.130) to correct camera shake in C (Movie) mode.

Press the 3 button in A mode.

Optical shake reduction only is used.

3 TakingPictures

Setting the Shake Reduction Function

You can set this function to correct camera shake which can occur during shooting. You can correct camera shake using optical shake reduction only (CCD-Shift), or the both optical and electronic shake reductions (Dual). The default setting is the optical shake reduction only (CCD-Shift).

CCD-Shift

Dual

Off

1

The [A Rec. Mode] menu appears.

2

3

4
	Use the four-way controller (23)	Rec. Mode	2/4
	to choose the Shake Reduction	EV Compensation	0.0
	setting.	Movie
		D-Range Setting
		Shake Reduction	CCD-Shift
		Blink Detection	Dual
		Digital Zoom	Off
		MENU Cancel	OK OK

5 Press the 4 button. The setting is saved.

6 Press the 3 button.

The camera returns to capture status.

One of the following icons appears on the display.

118