When the shutter release button is pressed halfway with [Shake M Reduction] set to [CCD-Shift] or [Dual].

lWhen [Shake Reduction] is set to [Off]. (If the camera shake is likely to occur, fis indicated when the shutter button is pressed halfway.)

• When [Shake Reduction] is set to [Dual], camera shake is corrected after shooting, and then the corrected image is saved.

When [Shake Reduction] is set to [CCD-Shift], CCD shifting sound may occur during shooting with C (Burst Shooting(H)). This is not malfunction.

In the following situations, [Shake Reduction] cannot be set to [Dual] (only [CCD-Shift] or [Off] can be selected in the pull-down menu.). If [Shake Reduction] is set to [Dual] beforehand, setting automatically changes to [CCD-Shift].

-When C (Movie), S (Fireworks), N(Frame Composite), X (Digital Wide) or F (Digital Panorama) mode is selected as the shooting mode

-When g (Self-timer), j (Continuous Shooting), A (Burst Shooting(L)), B (Burst Shooting(M)) or C (Burst Shooting(H)) is selected as the drive mode

-When the flash discharges

-When the shutter speed is slower than 1/4 sec.

-When the sensitivity is set to 1600 or higher

-During Voice Recording

Setting the Instant Review

Use this setting to specify whether or not an Instant Review is displayed immediately after images are taken. The default setting is O (On).

1 Press the 3 button in A mode.

The [A Rec. Mode] menu appears.

2 Use the four-way controller (23) to select [Instant

Review].

3 TakingPictures

119

Page 121
Image 121
Pentax 14176, 14191, 14161 Setting the Instant Review, Use the four-way controller 23 to select Instant Review, 119