Pentax 14176, 14191, 14161 specifications Using the Power Saving Function, 203

The [W Setting] menu appears.

When you press the 3 button in A mode, press the four-way controller (5) once.

Use the four-way controller (23) to select [Power Saving].

Press the four-way controller (5). A pull-down menu appears.

Using the Power Saving Function

You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness if any button is pressed.

1 Press the 3 button in Q mode.

2

3

4 Use the four-way controller (23) to select the time until the camera enters the power saving mode.

Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].

Setting	2/3
USB Connection	MSC2min.
Video Out	1minNTSC.
Eye-Fi	30sec.
Brightness Level	15sec	.
Power Saving	5sec.
Auto Power Off	3minOff.
MENU Cancel

7

5 Press the 4 button.

The setting is saved.

•Power Saving does not function in the following situations:

-While taking pictures in j (Continuous Shooting), A/B/C (Burst Shooting (L/M/H)) modes.

-In the playback mode

-While recording a movie

-While the camera is connected to a computer

-While a menu is being displayed

•When no operation is performed after the camera is turned on, the Power Saving function is activated only after 15 seconds elapse even if [5sec.] is set.

Settings

203