Pentax 14161 Resetting to Default Settings Reset, Use the four-way controller 23 to select Reset

4 Use the four-way controller (23) to select [Pixel Mapping].

Pixel Mapping

Checks the image sensor

and corrects defective

pixels

Pixel Mapping

Cancel

OK OK

5 Press the 4 button.

Defective pixels are mapped and corrected.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC117 (optional) or load a fully charged battery.

Resetting to Default Settings (Reset)

You can reset the camera settings to their defaults. Refer to “Default Settings” (p.234) for the reset settings.

1 Press the 3 button in Q mode.

The [W Setting] menu appears.

When you press the 3 button in A mode, press the four-way controller (5) once.

2 Use the four-way controller (23) to select [Reset]. 3 Press the four-way controller (5).

The [Reset] screen appears.

7 Settings

4 Use the four-way controller (23) to select [Reset].

Reset

Returns to default

settings

Reset

Cancel

OK OK

207