• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card or built-in memory is formatted. However the image is deleted if you change the start-up screen after deleting the recorded image or formatting the memory.

Select [Off] to hide the start-up screen.

The start-up screen is not displayed when the camera starts up in the playback mode.

Movies or images taken at F (Digital Panorama) mode cannot be used for the start-up screen.

Correcting Defective Pixels in the CCD Sensor (Pixel Mapping)

Pixel Mapping is a function for mapping out and correcting defective pixels in the CCD sensor. Run the Pixel Mapping function if image dots always seem to be defective in the same place.

1

72

Press the 3button in Amode, and press the four- way controller (5).

The [W Setting] menu appears.

[Pixel Mapping] cannot be selected when the 3button is pressed in Q mode.

Use the four-way controller (23) to select [Pixel Mapping].

Settings

3

 

Press the four-way controller (5).

The [Pixel Mapping] screen appears.

Setting 3/3

Reset

Delete All

Pixel Mapping

Format

MENU Exit

206

Page 208
Image 208
Pentax 14176, 14191, 14161 Correcting Defective Pixels in the CCD Sensor Pixel Mapping, Pixel Mapping screen appears, 206