La Crosse Technology WS-8011UM instruction manual IV Mounting, Foldout Table Stands, Wall Mounting

IV) MOUNTING

Hanging Holes

Function Buttons

Foldout Table Stands

There are two possible ways to mount the temperature clock:

•use of the foldout table stands

•wall mounting

A)FOLDOUT TABLE STANDS

The Foldout table stand legs are located on the backside, at the lower corners, and on both sides of the battery cover. The hinges are towards the edges of the temperature clock and the ends (with no hinge) need to be folded out towards the edge. Once the foldout table stands are extended place the temperature clock in an appropriate location.

B)WALL MOUNTING

1)Using a straightedge, horizontally space at 3- 15/16 of an inch (100.58mm) three screw positions on a wall.

2)Install three mounting screws (not included) into a wall within transmission range—leaving approximately 3/16 of an inch (5mm) extended from the wall.

3)Place the temperature clock onto the screws, using the hanging holes on the backside. Gently pull the temperature clock down to lock the screws into place.

10