a.Press and hold “AL/HOUR” button for 3 seconds until the alarm time is flashing.
b.Press and release “AL/HOUR” to advance the hour, and “SET/+/MIN” to advance the minute. The time will display “PM” if set to PM, and display nothing if set to AM.
c.The projection alarm clock will revert to normal operation when no buttons are pressed for 15 seconds. The alarm is now set and activated.
2.ACTIVATING/DEACTIVATING THE ALARM
a.After entering the alarm setting mode, the alarm is activated.
b.To toggle between activating and deactivating the alarm, press the “AL/HOUR” button briefly. “(((●)))”will be displayed above the time display when the alarm is activated.
3.TURNING ALARM OFF (WHILE SOUNDING)
a.While the alarm is sounding, press and release the “SNOOZE/ADVANCE MODE” bar to disable the alarm for 10 minutes.
b.After the “SNOOZE/ADVANCE MODE” bar is pressed the alarm icon will flash.
c.To disable the alarm for 24 hours, press and release any button other than the “SNOOZE/ADVANCE MODE” bar or display direction buttons.
NOTE: The alarm will sound for 120 seconds if the “SNOOZE/ADVANCE MODE” button is not pressed. The alarm speeds up twice, once after 20 seconds and again after 50 seconds.
14
