La Crosse Technology WT-5130ER manual Quick SET-UP Guide, Do not Press ANY Buttons for 15 Minutes

QUICK SET-UP GUIDE

Hint: Use good quality alkaline batteries and avoid rechargeable batteries.

1.Place the projection alarm and remote temperature sensor 3-5 feet apart.

2.Batteries should not be installed into either unit for 15 minutes.

3.Place the batteries into the remote temperature sensor first and then into the projection alarm.

4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the display and the sensor will begin to communicate with each other. The display will show both the indoor temperature/humidity and an outdoor temperature. If the station does not display both temperatures and the indoor humidity after the 15 minutes, please retry the set-up in the instructions above. After both indoor and outdoor temperatures are displayed for 15 minutes you can place your sensor outdoors and set your time.

The remote sensor should be placed in a dry, shaded area. The remote sensor has a range of 80 feet. Any walls that the signal has to pass through will reduce distance of the range. An outdoor wall or window has up to 20 feet of resistance and an interior wall has up to 10 feet of resistance. Your distance plus resistance should not exceed 80 feet in a straight line.

NOTE: Direct rain will damage your remote temperature sensor. Fog and mist, however, will not harm the sensor.

To complete the detailed set-up of your temperature station after the 15 minutes have passed, please follow the steps beginning on page 6.

5