Connecting the Power Supply to the 5big Backup Server
The power supply kit is composed of two cables:
one cable (A) connects to the LaCie 5big Backup Server; and the other cable (B) connects to a power source, such as a wall outlet or a surge protector (Fig. 05).
1.Connect Cable A to the 5big Backup Server.
2.Connect Cable B to the power supply brick (C).
3.Connect Cable B to a surge protector or wall outlet.
4.Turn on the device by pushing the button on the face of the 5big Backup Server.
5.The 5big Backup Server is powered and ready for use when the front LED stops blinking.
DESIGNED BY NEIL POULTON
B
LAN 1 | AUDIO OUT | USB | USB | USB | POWER |
eSATA
C
A
Fig. 05
CAUTION: (1) Only use the AC adapter supplied with your specific LaCie device. Since each product is unique, do not substitute a power supply from another LaCie device or another manu- facturer for the LaCie 5big Backup Server.
(2)Please note that the AC adapter provided with your LaCie device includes connectors for electrical outlets in multiple regions. Thanks to its
•Use a power cable, power supply, or power adapter other than one that has been autho- rized by LaCie.
•Do not remove your AC adapter when transporting your LaCie device. Neglecting to do so may damage your 5big Backup Server.
Connecting the Ethernet Cable
The 5big Backup Server is accessible when attached to
your network (Fig. 06). The 5big Backup Server must receive its IP address from a DHCP server.
1.Connect the Ethernet cable to the Ethernet port on the back of the LaCie 5big Backup Server*.
2.Connect the other end of the Ethernet cable into an available Ethernet port on your router.
3.If it is not powered on, turn on the 5big Backup
DESIGNED BY NEIL POULTON
LAN 1 | AUDIO OUT | USB | USB | USB | POWER |
Server. See Turning On the 5big Backup Server.
*The USB 2.0 and eSATA ports are for storage expansion only. They cannot be used for direct
connection to a computer.
Fig. 06
eSATA
6
